Connecting to mocopi
Point
For detailed parameters of the mocopi model, please refer to Specifications of mocopi-compatible Parameters.
1. Start the mocopi application, connect the sensor, and complete the calibration with reference to Sending Data from a mocopi App.
2. On the tracking screen of the application, select a motion at the top of the screen, switch to the motion mode, and press the motion transmission button.
3. On the nizima LIVE side, open the mocopi screen and select Start Connection.
4. Enter the same values for the port and IP address on the nizima LIVE side in the mocopi application and press Done.
Was this article helpful?
YesNo